Filter By:
- Accessories/Parts (115)
- Cyclo-Computers (57)
- GPS (41)
- Heart-Rate Monitors (25)
- Phone Accessories (14)
- Power Meters (8)
- Sports Watches (15)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Electronics

$3.99
- Replacement parts and accessories for SpeedTrap Digital Speed Sensor
- Fork Cap covers SpeedTrap pocket when sensor is removed
- Spacer is required on some forks to position sensor closer to wheel magnet

$3.99
Easily secure your GPS cycling computer to your favorite bike.
Includes:
- Two sets of O-rings (two diameters)
- A backup O-ring in each size

$4.99 - $22.99
Keep your computer and sensors ready for every ride with replacement batteries
Key features:
- CR2032 battery is used for most Trek and Bontrager computers
- 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor
- LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor

$5.00
The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break.
- Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503)
- Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

$5.99
- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights
- Also able to charge most other Micro USB systems
- 9 inches/23cm long

$6.95
$10.00
30% Off
High-efficiency charger cable for Flux headlights.
- High capacity wire can transfer more power with less loss.
- Custom "L" shaped Mini USB Male for the best fit to Flux headlights.
- NOTE: This is a CHARGE ONLY cable and cannot be used for data transfer.

$6.99
Each GPS unit comes with a Standard GPS Mount. Included are two sets of o-rings (two diameters), plus a backup o-ring in each size, a rubber shim and an X-Lock composite mounting bracket. The rubber shim supports the X-Lock mount which is engineered to attach at any 9° angle and still allow the computer to be mounted forward. The two super durable o-rings secure it to the bar, and the patent-pending X-Lock design will prevent the computer from being knocked out. The X-Lock securely fastens the GPS computer to the mount by pressing down at a 45° angle and rotating it forward until it "locks" into place.

$7.49
The Under Stem Mount allows riders to secure a Shimano Di2 Junction Box to their bike quickly and easily without the need for zip ties, duct tape, or other unreliable attachments.
- Lightweight alloy headset spacer with nylon body (9g)
- Compatible only with Shimano Di2 Junction Box
- 95mm length, 44mm width, 6mm height
- 6 Degree angle

$8.99
Get your computer dialed with the perfect magnet
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride.
- Universal crank magnets sized for your bike and sensor
- Compatible with all cadence sensors

$8.99
Get your computer dialed with the perfect magnet
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride.
- Universal crank magnets sized for your bike and sensor
- Compatible with all cadence sensors

$8.99
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride.
Key features:
- Universal crank magnets work with any cadence sensor
- Get the perfectly sized magnet, sized right for your bike and sensor
- 20mm cadence magnet improves signal for wider gaps between crank and sensor

$9.99
Easily integrated
Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras.
- Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet
- Tested with an accelerometer for intended breakaway point if involved in a crash

$9.99
Light up the road
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Universal Ion Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen.
- Blendr is an elegant, integrated accessory mounting solution
- Clip can be rotated for compatibility with many Bontrager accessories
- Works with any Blendr-compatible stem and the accompanying base

$9.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Trip Computer Mount for a clean, flush look that securely holds your Bontrager Trip computer in a perfect position to see on the go.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for Bontrager Insta-Mount or Trip Computer
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

$9.99
Handlebar and Stem Bracket Band and Bracket for your Strada Wireless, Strada Double Wireless, Urban Wireless, Micro Wireless, Commuter, and Adventure. The FlexTight Kit Wireless system is the full kit for your CatEye wireless computer mounting needs.

$10.99
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705.
- Glass-filled nylon, stainless steel Torx T25 bolt
- Weight: 20g

$11.99
The H-34 Flex-Tight Bracket is an OEM handlebar bracket so you can attach Cateye accessories. It fits all handlebars up to 32mm in diameter.

$12.99
Keep your computer where you can read it with Delta's stem bolt-mounted Computer Caddy.
It provides a mounting point for awkward or crowded bars.
- Mounts securely using the stem bolt
- Adds a space to mount up to two devices
- Weight limit of 125g (0.28 pounds) per side

$14.99
Need to hold down your GoKASE or DriKASE iPhone case? If you have multiple bikes, an ATV, or stroller, the Xtended X Bracket will allow multiple mountings with GoKASE or DriKASE iPhone cases.
• Fits handlebar diameters 22mm to 34mm

$14.99 - $19.99
Blendr add-on to Kovee Pro 35 stems
Clean up your Bontrager Kovee Pro 35 stem cockpit with Blendr Pro bases.
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory
- Bases for use with the Kovee Pro 35mm stem
- Add any accessory mount (sold separately) for an elegant, integrated look

$14.99
The Quad Lock Universal Adapter is designed using a strong adhesive that adheres directly to the rear of most smartphones or cases, which then allows your smartphone to securely attach to any Quad Lock mount.
- Universal adapter adheres directly to phone or phone case (not included)
- Dual-stage lock keeps your phone secure over bumps and jumps
- Compatible with all Quad Lock mounts
- Does not include mount

$15.99
- Sliding closure helps keep sweat and precipitation away from valuables
- Large, clear, center window allows easy operation of touch screen
- Compatible with most smartphones
- 7.5"" (19cm) x 4.5"" (11cm) wide

$17.99
Quickly and easily swap your Bontrager or Trek cycling computers and wireless sensors between bicycles without tools with these silicone mounting straps. Large and small sizes ensure proper fit on most forks.
• Designed for Bontrager and Trek analog wireless computers
• Interchange analog wireless sensor installs and removes in seconds without tools
• Interchange sensor includes both L and S silicone mounting straps to fit most forks
• Batteries can be found in computer accessories
Page 1 of 7
Next page